Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterMortar Repointing in Marietta, GA
Mortar repointing in Marietta typically runs $400 to $1,200 for a standard chimney crown and shoulder repair, with full chimney repointing jobs ranging from $1,500 to $4,000 depending on access and how much mortar needs cutting out. Most jobs take one to two days, and at Hadley Chimney Marietta we document every step with photos so you see exactly what we fixed and why. If the mortar joints on your Chimney Repair in Marietta are crumbling, flaking, or missing in chunks, repointing is the fix that stops water from working its way into the brick and causing far more expensive structural damage.
Repointing is the trade term for removing deteriorated mortar from between bricks and replacing it with fresh, correctly matched mortar. It is not a cosmetic touch-up. In Marietta’s climate, where summer humidity and winter freeze-thaw cycles alternate against the same brick face for years, mortar takes a beating. Cracks let water in, water freezes and expands, and the joints fail faster every season. We have been providing our Chimney Repair services here since 2003, and the pattern is consistent: homeowners who repoint early spend a few hundred dollars. Homeowners who wait end up rebuilding sections of the chimney stack.
Call (762) 249-4619 for a free estimate. We answer the phone with a live person, around the clock.
When You Need Mortar Repointing
Here are the specific signs we see most often on Marietta chimneys, from East Cobb ranches to older brick homes near Marietta Square:
- Flaking or sandy mortar on the ground or roof. If you find gritty residue at the base of the chimney or in the gutters below it, the joints are actively shedding material. This is the earliest and cheapest time to fix it.
- Visible cracks running through mortar joints. Hairline cracks grow into gaping channels after enough Georgia freeze-thaw cycles. Water gets behind the brick and starts separating the chimney from the house structure.
- Missing mortar in patches. On older Marietta homes, especially pre-1970 brickwork, the original lime mortar was softer than modern Portland mixes. It erodes in patches and leaves bricks sitting loose, which is a structural hazard.
- Water stains on the ceiling or walls near the fireplace. Deteriorated mortar lets rain run down the inside of the chimney chase. By the time you see a stain on drywall, water has already been traveling along the flue for months.
- White powdery deposits on the brick face. That is efflorescence, the mineral salts left behind when water soaks through the masonry and evaporates. It means moisture is penetrating the joints.
- Bricks that have shifted or begun to spall. When mortar fails, bricks lose their cushion. They rub against each other, crack, and the faces pop off. Spalled brick is the point where repointing alone may not be enough; you may be looking at partial rebuild.
We work with HeatShield ceramic repair compound and Gelco masonry products when the damage extends beyond the outer joints. If the firebox or smoke chamber has eroded from the inside, repointing the exterior alone does not fix the chimney. We check both.
Our Mortar Repointing Process
Here is exactly what happens when you book repointing with Hadley Chimney Marietta. No vague windows, no guesswork on price, no surprise scope changes once we are on the roof.
- We schedule a tracked arrival window and confirm by text. You get a live arrival time the same way you would for a rideshare. Cory Mitchell founded this company in 2003, and the team is background-checked and uniformed. You will know who is walking up your driveway before they ring the bell.
- We inspect the full chimney, not just the visible mortar. Repointing is rarely the whole story. We check the crown, the flashing, the flue liner, and the firebox to make sure water has not caused damage where you cannot see it. If we find anything beyond the repointing scope, we show you photos before any additional work is discussed.
- We give you a written price before any work starts. This is a standing commitment, not a promotion. The number you approve is the number you pay, every time. If we find hidden damage mid-job, work stops until you have seen the photos and said yes to a written change order.
- We cut out the deteriorated mortar to a consistent depth. Depending on the condition of the existing joints, that means grinding or hand-cutting anywhere from half an inch to a full inch deep. You cannot smear fresh mortar over crumbling mortar and expect it to hold. The joint has to be clean and solid.
- We match the new mortar to your existing brick type. On older Marietta homes, original mortar was often lime-based and softer than modern cement. Using the wrong mix traps moisture inside the brick and accelerates spalling. We match color and compressive strength so the repair weathers and ages consistently with the rest of the wall.
- We document the finished work with before-and-after photos. Every job includes photo proof via The Relay Visibility Guarantee. You see the cut joints, the fresh mortar, and the finished face. The written guarantee on every repair is backed by a 365-Day Done Right Promise: if it is not done right, we make it right, with a free second visit if the repair fails.
We work with Olympia Chimney and Famco components when the repair involves the cap or crown, which often needs repointing or replacement at the same time as the joints below it.
Mortar Repointing Pricing in Marietta
How Much Does Chimney Repair Cost? (2026 Price Guide) - Marietta, GA depends on three things: how much mortar needs to be removed, how high the chimney is, and whether access requires scaffolding or a lift. Here is what you can expect in this market, based on the jobs we have priced across Cobb County and the Marietta area:
| Scope of Work | Typical Marietta Price Range |
|---|---|
| Spot repointing (small section of joints, ground-level chimney) | $400 – $800 |
| Crown repair and repointing (top cap, standard 1.5-story roof) | $600 – $1,200 |
| Full chimney repointing (all four sides, standard roof height) | $1,500 – $3,000 |
| Full repointing on a steep or tall roof (requires lift or staging) | $2,500 – $4,000 |
| Partial rebuild plus repointing (spalled brick replacement) | $2,000 – $5,000 |
Every estimate we provide in Marietta is line-item specific and in writing. No “masonry labor” lump sums. You will see exactly how many linear feet of joint we are cutting, what the access plan is, and what materials we are using.
A few factors move the price:
- Roof pitch and chimney height. A chimney on a steep West Cobb lot with poor ladder access costs more to service than one on a flat carport roof. Safety equipment and staging time are real costs, and we will show them on the quote.
- Mortar condition. If the joints are so far gone that we are cutting an inch deep across the entire stack, labor hours go up. The fix costs more the longer you wait.
- Brick damage. Repointing fresh joints around spalled brick does not solve anything. If bricks need replacement, that gets quoted separately and clearly.
- Hidden interior damage. Sometimes the outside looks manageable, but the smoke chamber or flue is scored and needs HeatShield treatment. We will show you the camera footage before we ever add that to the invoice.
If you are in Marietta, Powder Springs, Kennesaw, or anywhere in Cobb County, call (762) 249-4619 for a free estimate. We will give you a real number in writing before you commit to anything.
FAQs – Mortar Repointing
How much does mortar repointing cost in Marietta, GA?
Mortar repointing in Marietta typically costs $400 to $1,200 for spot or crown repairs and $1,500 to $4,000 for a full chimney repointing job. Access height and how much mortar needs cutting out drive the price. For an exact number on your chimney, call (762) 249-4619. We provide a free, written estimate before any work starts.
Can you repoint mortar the same day?
Spot repointing jobs can often be completed the same day we come out for the estimate, as long as the weather cooperates. Full chimney repointing takes one to two days, plus a short curing window for the mortar before we consider the job done. Call (762) 249-4619 and a live person will get you on the schedule with a tracked arrival time.
Is mortar repointing a safety issue?
Yes. Deteriorated mortar lets water penetrate the chimney structure. In Marietta’s freeze-thaw winters, trapped moisture expands and contracts, which can cause Spalling Brick Repair issues and loosen bricks to the point where they fall. A loose brick from a chimney stack can injure someone or damage the roof. Repointing is a structural repair, not an aesthetic one. We recommend a trained professional handle it rather than attempting it from a ladder yourself. The risk of working at height, plus the risk of using improperly matched mortar, makes this a job where a professional repair protects the home and the homeowner.
Is it cheaper to repair or replace the chimney mortar?
Repointing is almost always less expensive than a full chimney rebuild, and it can extend the life of the existing structure by decades when done properly. Replacement only becomes necessary when the brick itself has failed, the chimney has shifted, or the interior flue system is no longer safe. Call (762) 249-4619 for a free inspection and we will tell you honestly whether repointing is enough or if you are looking at a larger repair.
Written by Cory Mitchell, Owner at Hadley Chimney Marietta, serving Marietta.