Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Mableton, GA | Hadley Chimney Marietta
We provide independent Chimney Sweep in Mableton and HeatShield service, and the one thing that sets our work apart here is prep. Most failed HeatShield applications we see in Mableton didn’t fail because of the product. They failed because the chimney wasn’t dried, crowned, and capped before the coating went on. Our technicians are certified in HeatShield Cerfractory Flue Sealant application and have restored hundreds of Mableton chimneys. If you need a straight answer about whether HeatShield is right for your flue, call (762) 249-4619.
We’re also the team behind HeatShield sales & service across the broader metro area. Same crew, same 365-Day Done Right Promise, same camera-first approach.
Why Mableton Residents Choose Us for HeatShield Service
HeatShield is a ceramic-based flue repair system, and getting it right depends on knowing what the flue looked like before anyone opened a bucket. Around here, that means understanding Mableton’s housing stock: 1960s brick ranches with original clay tile liners, 1990s two-story traditional homes with prefabricated metal flues, and everything between. We’ve seen which liners take HeatShield well and which ones need a different fix, like a DuraFlex stainless liner.
Cory Mitchell, our owner, started his trade training at Los Angeles Trade-Technical College and has spent the better part of two decades on real jobs across the Southeast. He’s been working Mableton service area homes for years. The habit he drilled into our crew: before recommending any coating, we run a camera up the flue and show you exactly what we found. “I’ll send you the photo first – then we’ll talk about what it means.” That’s the whole approach.
We’re an independent HeatShield provider, not manufacturer-affiliated or authorized. That matters because our recommendation is based on what your flue actually needs, not on what a brand program tells us to sell. We use genuine HeatShield Cerfractory products when HeatShield fits. When it doesn’t, we say so and show you why.
Styles & brands we work with
Common HeatShield Chimney Cleaning Problems We Solve in Mableton
- Failed prior HeatShield applications on 1960s-1980s brick ranches. Original clay tile liners in these older Mableton homes often cracked extensively before the first coating went on. We remove the loose material, repoint the underlying mortar, and only then decide whether a reapplication makes sense.
- HeatShield applied over spalled clay tiles without full prep. Off Floyd Road especially, decades of moisture have left clay tiles flaking and fragile. If a contractor coated right over that, the spalled sections eventually detach behind the coating and the whole system loses adhesion.
- Water intrusion through HeatShield-coated crowns on chimneys lacking rain caps. Mableton Estates has a lot of original chimneys with no cap. Rain pools on the crown, seeps behind the coating, and freeze-thaw cycles delaminate it. We fix the crown and install a cap before recoating.
- Improperly mixed or cured HeatShield Cerfractory Foam in humid summers. Mableton’s summer humidity slows curing and can leave soft spots if the mix wasn’t right. Those soft spots reduce insulation value in the prefabricated metal flues common in 1990s-2000s subdivisions.
- Routine creosote removal before any HeatShield work. You can’t coat a dirty flue. We sweep first, always. Mableton’s wood-burning fireplaces in new and old homes alike collect softwood creosote fast, and that glazed layer must come off before any sealant bonds.
HeatShield Service in Mableton: What Local Conditions Mean for Your Equipment
Here’s the pattern we see in Mableton that you won’t hear about from a generic chimney company. In older neighborhoods off Floyd Road, many original brick chimneys still lack rain caps. Every spring, we get calls about water-stained ceilings and rusted dampers. But when we run a camera up those flues, we often find something else too: HeatShield coatings that failed early because water pooled on top of the coating and seeped behind it. This failure mode is almost never seen in newer subdivisions like Providence, where caps are standard. That moisture load changes what proper HeatShield prep looks like here. Crown repair, cap installation, full drying time. Skip those steps and you’re buying a five-year patch. Do them right and you’re looking at a two-decade fix. That’s the difference between an informed Mableton homeowner and one who gets sold a coating in a single afternoon.
We serviced a split-level on Mableton Parkway near Mableton Estates where the homeowners had HeatShield applied by a low-bid contractor three years prior. Our camera inspection showed the sealant had cracked along the original clay tile mortar joints, allowing smoke to push into the wall cavity. After removing the loose coating, we repointed the underlying mortar, applied HeatShield Joint Repair System to the joints, then resurfaced the entire flue with HeatShield Resurfacing System. It’s been holding without leaks through two winters.
HeatShield Models & Products We Service in Mableton
We service the full HeatShield product line. HeatShield Cerfractory Flue Sealant for surface coating. HeatShield Joint Repair System for cracking mortar joints between clay tiles. HeatShield Resurfacing System for full flue rebuilds after tile loss. HeatShield CeCure Sleeve Relining System for chimneys that need a structural sleeve rather than a topical coating. We stock genuine HeatShield foams, sealants, and repair materials for fast Mableton turnaround. Generic refractory mortars don’t meet HeatShield’s expansion and adhesion specs, so we don’t substitute them. For older chimneys with extensive tile loss or structural cracks, we recommend a DuraFlex stainless liner instead of a HeatShield patch, because at that point the flue can no longer support the coating.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Mableton
Chimney sweeps in Mableton typically run $159 to $229. A Level 2 camera inspection adds $129 to $199. HeatShield Cerfractory Flue Sealant application on a standard single-flue chimney sits between $1,800 and $2,600, depending on flue height and prep work needed. Joint Repair System work runs $600 to $1,200 for typical Mableton flues with cracked mortar joints. Full Resurfacing System applications start around $3,000 and go up from there, again driven by prep. If the chimney hasn’t been swept in years, the creosote removal cost folds into the same visit. Every quote is written before we start, and every repair carries our 365-Day Done Right Promise. Call (762) 249-4619 for a free estimate.
Serving Mableton, GA - Our Local Coverage Area
We’re based in the Mableton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Mableton
HeatShield fails near Floyd Road most often because those original brick chimneys lack rain caps, so water pools on the crown and seeps behind the coating, breaking the bond through freeze-thaw cycles. We fix the crown and add a cap before recoating. Call (762) 249-4619 and we’ll run a camera up first.
HeatShield is designed for flue sealing, not for structurally rebuilding spalled brick in the firebox. If the spalling brick is inside the firebox itself, that’s a firebox rebuild, usually done with refractory mortar and firebrick replacement. HeatShield works on the flue above the damper, not the firebox walls.
If the clay flue has a few cracked mortar joints and the tile structure is still intact, HeatShield Joint Repair System plus a resurfacing coat usually does the job. If the tiles are extensively broken, shifted, or missing sections, a DuraFlex stainless liner is the honest answer, because HeatShield needs a stable surface to bond to. We’ll show you the camera footage and let you decide.
Yes. We won’t apply HeatShield without running a Level 2 camera inspection first. You need to see the condition of the flue before anyone coats it, and so do we. That inspection tells us whether we’re prepping for a clean application or discovering the flue can’t support the coating at all.
With proper prep – crown repair, rain cap installation, full drying time – HeatShield routinely lasts 20 years or more on Mableton chimneys. Without that prep, we’ve seen coatings fail in three to five years. The product is not the variable. The prep is. Call (762) 249-4619 for an exact quote, estimates are free.
Service Areas Near Mableton
We provide HeatShield service throughout Mableton, including Mableton Estates, Providence, and neighborhoods off Floyd Road and Mableton Parkway. We also cover HeatShield service in Marietta, HeatShield service in Milton, Lithia Springs, Vinings, and Fair Oaks.
Book Your HeatShield Service in Mableton Today
Call (762) 249-4619 and you’ll get a live person, a written price before work starts, and a camera inspection so you can see the flue before any coating goes on. That’s how every Mableton HeatShield job works.
Written by Cory Mitchell, Owner at Hadley Chimney Marietta, serving Mableton since 2003.