Famco Chimney Sweep Nationwide

Famco Chimney Sweep in Marietta: What to Know First

An independent Famco chimney sweep in Marietta typically takes 60 to 90 minutes from setup to final photo report, and most sweeps run between $189 and $289 depending on creosote stage and liner condition. We’re Hadley Chimney Marietta, and as an independent Famco service provider, we work on Famco chimneys and fireplaces across Cobb County without the four-hour arrival window or the price that changes once the brush comes out.

Call (762) 249-4619

If you own a Famco fireplace or chimney system and it hasn’t been swept in two years or more, this page is for you. We’ll cover what actually goes wrong with Famco units, what a sweep costs here in Marietta, and exactly what our techs check before, during, and after the job. Call (762) 249-4619 and you’ll get a live person, not a queue.

How Famco Products Fail – and How We Fix Them

Famco builds solid chimney and venting components, but any brand has its weak points. Here’s what we consistently find on Famco systems in Marietta homes, from older ranch houses off Powder Springs Road to newer construction near East Cobb.

• Famco triple-wall air-cooled chimney sections collect creosote at the seams. The locking bands between sections create small ledges where creosote (the flammable tar residue from wood smoke) builds unevenly. In Marietta’s humid summers, that creosote absorbs moisture and turns crusty, which makes it harder to remove without the right brushes. We use rotary whip heads sized to Famco’s inner diameter rather than forcing a square brush through, which can scar the liner.
• Famco termination caps with expanded metal mesh clog faster than louvered caps. The fine mesh on many Famco caps traps soot and creosote flakes at the top, even when the flue itself is clean. We see this a lot on homes near Kennesaw Mountain where wind patterns push embers and debris against the cap. When we sweep a Famco system, we remove and clean the cap separately, then photograph it before reinstalling.
• Famco anchor plates loosen over time, and nobody notices until smoke backs up. The anchor plate is the metal plate at the roofline that holds the chimney section in place. Temperature swings between Marietta’s July heat and January cold cause the metal to expand and contract, working the fasteners loose. A sweep is the ideal time to check this because we’re already at the roofline with tools in hand. Loose anchor plates on Famco systems are one of the most common causes of intermittent smoke smell we fix after other companies “swept” the flue and called it done.
• Famco firestop spacers in attic spaces are often installed too tight. The firestop spacer (the metal collar where the chimney passes through the ceiling into the attic) needs a specific clearance to framing. On Famco installs from the 1990s and early 2000s we regularly find the spacer pressed directly against joists, which is a fire hazard regardless of how clean the flue is. During a Level 2 inspection we check this and document it in photos. If it’s wrong, we tell you plainly and give you the repair price before anything happens.
• Famco oval-to-round adapters on fireplace inserts develop soot channels. When a Famco chimney is paired with an insert or stove, the transition piece from oval to round is where turbulence slows down smoke and drops soot. Over time that soot cakes into a ridge that narrows the flue opening. A standard sweep will clear the ridge, but we also inspect the adapter for cracks, because that’s where they start.

Our Famco Chimney Sweep Process

Here’s what happens when you book a Famco sweep with Hadley Chimney Marietta, start to finish.

1. 1
   Call and book. A live person answers at (762) 249-4619, takes your address, asks what Famco system you have if you know, and gives you a real arrival window you can track. No four-hour guess.
2. 2
   Arrival and setup. Our background-checked, uniformed tech shows up, lays drop cloths from the door to the fireplace, and runs a quick visual check of the firebox, damper, and cap before touching anything.
3. 3
   Written price before the brush goes in. If we find something unexpected like a cracked firebrick or a liner issue, you get a written price and a photo before we proceed. If the sweep is straightforward, the price we quoted on the phone is the price on the invoice.
4. 4
   The sweep itself. We use Famco-specific brush sizes and rotary heads matched to your flue’s inner diameter, working top-down or bottom-up depending on access and cap design. We remove the cap, clean it separately, and clear the smoke shelf and damper area by hand.
5. 5
   Camera check and photo report. After the sweep, we run a camera up the flue and send you the before-and-after photos before we write up any recommendation. Cory’s rule applies here: “I’ll send you the photo first – then we’ll talk about what it means.”
6. 6
   Cleanup and invoice. The fireplace area is left as clean as we found it, and you get a digital invoice you can pay from your phone. Every repair we recommend carries a written guarantee and a 365-Day Done Right Promise: if it’s not done right, we make it right, including a free second visit if a repair fails.

What Famco Chimney Sweep Costs in Marietta

Chimney sweep pricing in Marietta varies by creosote stage, flue height, and whether the system has an insert adapter or unusual cap setup. Here are the numbers we quote most often for Famco systems in this area.

• Standard Famco sweep, open fireplace: $189 to $249
• Famco sweep with heavy creosote (Stage 2 or 3): $249 to $329, includes additional time and solvent treatment
• Famco sweep with insert or stove adapter: $229 to $289, includes adapter cleaning
• Famco Level 2 camera inspection (added to sweep): $99 to $149 depending on flue height and access
• Cap replacement or anchor plate re-securing (if needed): $85 to $220 depending on cap type and roof condition

What moves the price: creosote stage, roof pitch, chimney height, and whether the cap needs replacement. What doesn’t move it: the technician’s mood. You get the written price before work starts, every single time. Call (762) 249-4619 for an exact quote on your Famco system – estimates are free and don’t take long.

Why Marietta Homeowners Call Hadley Chimney Marietta for Famco Work

Marietta homeowners call us because we show up when we say we will and because we can talk Famco specifics without guesswork. Our techs have been working on Famco chimneys in Marietta for years, from newer builds near Kennesaw Mountain where the installs are recent to older craftsmans where the Famco sections have been through twenty Georgia winters.

Every Famco job we do comes with a written guarantee and the 365-Day Done Right Promise: if it’s not done right, we make it right, with a free second visit if a repair fails. We also work with DuraFlex liner systems, HeatShield ceramic repair compound, and Gelco sealants, so when a Famco component needs replacement, we can install materials we trust and stand behind, not whatever’s on clearance. Booked through us, you get live arrival tracking, before-and-after photo documentation, and a written price before work begins – that’s the Relay Visibility Guarantee, and it applies to every Famco sweep we do in Marietta, not just the big repair jobs.

FAQs